Chapter23: Configuring Frame Relay Interworking
Avidia System Configuration and Management User Manual 471
4In the Line row, do the following:
aIn the Slot box, select the slot of the line card.
bIn the Port box, select the port of the line card.
cIn the VPI box, type the frame relay (fr) VPI of the fr VCC between the frame channel
card and the line card.
dIn the VCI box, type the fr VCI of the fr VCC between the frame channel card and the
line card.
5In the Data Link row, do the following:
aIn the LMI Type box, select the Local Management Interface type.
The LMI type defines a method of exchanging status information between the
customer device and the network. The following LMI Types are supported:
None—no LMI support
Rev-1—LMI Rev-1
Annex A—ITU 0.933 Annex-A
Annex D—ANSI T1 617 Annex-D
bIn the Poll Interval box, type the poll interval value in seconds. The valid range is 5 to
30, with 10 as the default.
Poll Interval is the number of seconds between LMI status inquiry messages.
cIn the Inquiry Interval box, type the inquiry interval value. The valid range is 1 to 255,
with 6 as the default.
Inquiry Interval is the number of poll intervals before a full status inquiry message is
sent.
If LMI Type is set to None, Poll Interval, Inquiry Interval, Error Threshold, and
Monitor Events are not used.