Chapter8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 175
Deleting Primary and Backup Cell Channel Card PVCCs
You can delete primary and backup cell channel card PVCCs from the ::pvcc=> prompt.
1From the ::pvcc=> prompt, type show then press to display the configured
parameters for all PVCCs.
2Note the index number of the PVCC you want to delete (or for which you want to delete
the backup PVCC).
3Type the delete command in the following format then press .
delete <index> [-backup]
Parameters
<index>
The index number of the PVCC you want to delete.
[-backup]
(Optional) Type -backup to delete the backup PVCC associated with the primary PVCC
and leave the primary PVCC configuration in place. Omitting this parameter deletes both
the primary PVCC and any configured backup PVCC.
Examples
::pvcc=> delete 2 -backup
::pvcc=> delete 2
If you remove a card from the system, the PVCCs associated with the ports on
that card are disabled, however the PVCC configuration is not automatically
removed from the PVCC table. Be sure to delete unused PVCC configurations
so the PVCC configuration table accurately reflects the PVCCs in use in the
system.
ENTER
ENTER