Chapter29: System Maintenance andAdmi nistration
Avidia System Configuration and Management User Manual 583
5In the Access Level box, select the desired security level for this user.
6In the Telnet Access box, select Yes to enable the user to access the command-line interface
using a Telnet session, otherwise select No.
7In the Craft Access box, select Yes to enable the user to access the command-line interface
using the management card craft port, otherwise select No.
8In the Web Access box, select Yes to enable the user to access the Web interface, otherwise
select No.
9In the FTP Access box, select Yes to enable the user to access the system for file management
using FTP protocol, otherwise select No.
Only user accounts with Admin security level can be configured to allow FTP access.
10 Do one of the following:
•To save the user account configuration, click Set, then in the confirmation box click
Back.
•To close the User Table window without saving the user account information, click
Cancel.
Access Level View Information
Configure All
Information Except
User Accounts Configure User
Accounts
Monitoring Yes No No
Provisioning Yes Yes No
Admin Yes Yes Yes