Displaying System Inventory
588 Avidia System Configuration and Management User Manual

Setting the Refresh Rate

The Web interface refresh rate determines the interval at which the data on the performance data
screens is automatically refreshed. When the management card is rebooted, this setting reverts
to the default value of five minutes.
1In the User Table window Refresh Time (seconds) box, type the desired refresh rate in
seconds.
The valid range is 5 to 86,400 seconds.
2Do one of the following:
•Click Set to save the new setting.
•Click Get to cancel the new setting. You can only cancel the new setting if you have
not yet clicked Set.
DISPLAYING SYSTEM INVENTORY
You can display the card description, serial number, hardware version, firmware version and
software version for each card installed in the system.
1Do one of the following to display the System Inventory window:
•In the Site Map Navigation window, click System Inventory.
•In the Tree Navigation window, click System Maintenance, System Inventory.
2If desired, click Get to refresh the settings with the most current information.