Setting Up Connections
72 Avidia System Configuration and Management User Manual
IDSL Service
Do the following to configure IDSL frame-based services:
•Create one or more IDSL line profiles. See “Configuring IDSL Line Profiles” on page127
(command-line interface) or “Configuring IDSL Line Profiles” on page406 (Web
interface).
•Create one or more IDSL alarm profiles. See “Configuring IDSL Alarm Profiles” on
page 130 (command-line interface) or “Configuring IDSL Alarm Profiles” on page 408
(Web interface).
•Configure service for the IDSL frame card ports, including selecting the IDSL card transmit
clock source. See “Configuring IDSL Service” on page 133 (command-line interface) or
“Configuring IDSL Service” on page411 (Web interface).
•Select either ATM VCC or Frame Relay to match the modem. For example, if you are using
a WebRamp 450i modem configured with Ramp1483 service type, configure an ATM
VCC using ramp1483 encapsulation type. If the WebRamp 450i modem is configured for
Frame Relay, you will need to set up Frame Relay service. See “Frame Relay
Transmission” on page 26 for information on configuring Frame Relay service.