Chapter24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 499
To modify RIP information:
1In the RIP Configuration Table window, click .
The Modify RIP Configuration window opens.
2To modify the Send mode in the Send box select the desired setting (Do Not Send, RIP Version
1, RIP1 Compatible, RIP Version 2).
3To modify the Receive mode, in the Receive box select the desire setting (RIP 1, RIP 2, RIP
1 or RIP 2, Do Not Receive).
4To modify the hop count, in the Hop Count box type the number of hops the packets are
allowed to cross before arriving at their destination.
5To modify the authentication type, in the Authentication Type box, select the desired setting
(No Authentication or Simple Password). You can only set the authentication type to Simple
Password if you are using a Send or Receive mode that supports RIP 2.
The authentication type determines whether a password is required for the router to learn
information from the session ports in the same network segment.
6If you selected No Authentication in Step5, go to Step 8.