Configuring PVPCs
168 Avidia System Configuration and Management User Manual
Deleting Primary and Backup Cell Channel Card PVPCs
1From the ::pvpc=> prompt, type show then press to display all configured
PVPCs.
2Note the index number, port number, and VPI for the PVPC you want to delete.
3Type the delete command in the following format then press .
delete <index> [-backup]
Parameters
<index>
The index number of the PVPC you want to delete.
[-backup]
(Optional) Type -backup to delete the backup PVPC associated with the primary PVPC
and leave the primary PVPC configuration in place. Omitting this parameter deletes both
the primary PVPC and any configured backup PVPC.
Examples
::pvpc=> delete 2 -backup
::pvpc=> delete 2
If you remove a card from the system, the PVPCs associated with the ports on
that card are disabled, however the PVPC configuration is not automatically
removed from the PVPC table. Be sure to delete unused PVPC configurations
so the PVPC configuration table accurately reflects the PVPCs in use in the
system.
ENTER
ENTER