Chapter16: Monitoring System Alarms and Status
Avidia System Configuration and Management User Manual 329
The following table describes the alarm information that displays when you type the log alarm
command.
When you type log all, a screen similar to the following displays.
Information Description
Timestamp The time and date the alarm occurred.
Type The type of event. Options:
•alarm—An alarm has occurred or been cleared.
•trap—A trap has been sent.
•bintrace—A binary trace has been sent. This
information is for technician use only.
•txttrace—Additional details regarding about the
sent traps. This information is for technician use
only.
Slot The slot number associated with the alarm.
Description Reports the alarm severity, Alarm ID and description
as obtained from the alarm description database.
::admin=>log all
Timestamp Type Slot Description
THU, DEC 23 1999 06:50:40 txttrace InitIbc: OK
THU, DEC 23 1999 06:50:40 trace 4 Trap: chassis config change
THU, DEC 23 1999 06:50:40 alarm 6 No Alarm, Alarm #104: chassis
line card down