Chapter24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 501
Modifying System Bridging Parameters
In the System Bridging Configuration window:
1Use the WAN Broadcast box to Enable or Disable the broadcasting of unknown WAN frames
to all WAN logical interfaces.
2Use the Bridging box to Enable or Disable bridging for the system.
3In the Aging Time Interval box, type the interval, in seconds, after which Bridging Table
entries are deleted if they are not relearned. The valid rate is 10 - 1000000. The default is
300 seconds.
4Use the Spanning Tree Protocol box to Enable or Disable STP for the system.
5Do one of the following:
•To activate the settings and close the System Bridging Configuration window, click Set.
•To cancel the settings and close the System Bridging Configuration window, click Close.