ADC SWD4573I1 C ONFIGURING IDSL S

Chapter6: Configuring Subscriber Services

Avidia System Configuration and Management User Manual 133

1From the ::alarm=> prompt, type show then press to display the configured

IDSL alarm profiles.

2Note the index number of the profile you want to delete.

3Type the delete command in the following format then press .

delete <index>

Parameter

<index>

The index number of the alarm profile you want to delete.

Example

::alarm=> delete 3

CONFIGURING IDSL SERVICE

You assign IDSL service for the card by specifying the transmit clock source and for each port

by specifying a line profile and alarm profile. Before configuring an IDSL port, make sure you

have:

You cannot delete profiles that are assigned to ports. You cannot delete the

default profile.

Set up the desired IDSL line profile (see “Configuring IDSL Line Profiles” on page127

for instructions).

Set up the desired IDSL alarm profile (see“Configuring IDSL Alarm Profiles” on

page 130 for instructions).

ENTER