Chapter8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 201

Displaying the UPC Table

To verify the policing configuration for each port, from the ::port=> prompt, type show then
press . A screen similar to the following displays.
PVC Policing
Policing, or UPC, enables you to specify whether traffic must conform to the configured traffic
contract. When policing is enabled, traffic that does not conform to the contract is deleted. You
can enable or disable policing by PVCC.
You enable or disable policing (UPC) by ATM port from the ::vcl=> prompt. From the
::root=> prompt, type the following command then press to display the ::vcl=>
prompt:
configuration atm upc vcl

Configuring PVCC Policing

1From the ::port=> prompt type show to display the PVCC Table.
2Note the index number of the PVCC Table entry for which you want to configure policing.
3From the ::vcl=> prompt type the modify command as follows, then press .
modify <index> <enable|disable>
ENTER
::port=> show
UPC
Index Port Status
1 1.1 enable
2 3.1 disable
3 3.2 enable
4 3.3 enable
5 3.4 enable
ENTER
ENTER