ADC SWD4573I1 C ONFIGURING ADSL A LARM P

Configuring ADSL Alarm Profiles

388 Avidia System Configuration and Management User Manual

1In the ADSL Line Profile Table window, locate the table row that contains the ADSL line

configuration profile you want to delete.

Click and if necessary to view the entire table. displays the beginning of the

table. displays the next page of the table.

2Select the Delete check box next to the row that contains the profile you want to delete. To

select the Delete check box for all rows (except the default profile, which cannot be

deleted), click Check All.

If you decide not to delete a selected row, clear the Delete check box next to the row. Click

Clear All to clear the Delete check box for all rows.

3Click Delete Checked Row(s) to delete the profiles.

A confirmation dialog displays.

4Click OK to delete the selected table rows, otherwise click Cancel.

CONFIGURING ADSL ALARM PROFILES

ADSL alarm profiles determine the conditions that generate SNMP traps. When the configured

thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap receiver(s).

Only one trap is sent for each 15-minute data collection period. You assign alarm profiles to

ADSL ports during port configuration. A default profile exists with an index of 1. You cannot

delete the default profile.

To configure an ADSL alarm profile:

1Open the ADSL Port Configuration window (see “Configuring ADSL Service” on page 391).

2Click the Alarm Profile Browse button.

You cannot delete profiles that are assigned to ports. You cannot delete the

default profile.