ADC SWD4573I1 C ONFIGURING SDSL C ELL A LARM P

Chapter6: Configuring Subscriber Services

Avidia System Configuration and Management User Manual 121

1From the ::line=> prompt, type show then press to display the SDSL cell line

profile table.

2Note the index number of the SDSL cell line profile you want to delete.

3Type the delete command in the following format then press .

delete <index>

Parameter

<index>

The index number of the SDSL cell line profile you want to delete.

Example

::line=> delete 2

CONFIGURING SDSL CELL ALARM PROFILES

SDSL cell alarm profiles determine the conditions that generate SNMP traps. When the

configured thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap

receiver(s). Only one trap is sent for each 15-minute data collection period. SDSL cell port

configuration requires assigning an alarm profile, therefore you must configure the desired

alarm profile prior to configuring the SDSL cell port. A default profile exists with an index of1.

You cannot delete the default profile. Setting the threshold value to zero disables the trap.

You configure SDSL cell alarm profiles from the ::alarm=> prompt. From the ::root=>

prompt, type the following command then press to display the ::alarm=> prompt.

configuration sdsl cell profile alarm

You cannot delete profiles that are assigned to ports.

ENTER