ADC SWD4573I1 C ONFIGURING IDSL A LARM P

Configuring IDSL Alarm Profiles

408 Avidia System Configuration and Management User Manual

1In the IDSL Line Configuration Profile Table window, locate the table row that contains the

IDSL line configuration profile you want to delete.

Click and if necessary to view the entire table. displays the beginning of the

table. displays the next page of the table.

2Select the Delete check box next to the row that contains the profile you want to delete. To

select the Delete check box for all rows (except the default profile, which cannot be

deleted), click Check All.

If you decide not to delete a selected row, clear the Delete check box next to the row. Click

Clear All to clear the Delete check box for all rows.

3Click Delete Checked Row(s) to delete the profiles.

A confirmation dialog displays.

4Do one of the following:

•Click OK to delete the selected table rows.

•Click Cancel to not delete the table rows.

CONFIGURING IDSL ALARM PROFILES

IDSL alarm profiles determine the conditions that generate SNMP traps. When the configured

thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap receiver(s).

You assign alarm profiles to IDSL ports during port configuration. A default profile exists with

an index of1. You cannot delete the default profile.

To configure an IDSL alarm profile:

1Access the IDSL Port Configuration window (see “Configuring IDSL Service” on page411 ).

2Click the Alarm Profile Browse button.

You cannot delete profiles that are assigned to ports. You cannot delete the

default profile.