Chapter 4 143
ESA Functional Tests
Frequency Response (Flatness)
ESA Functional Tests
Figure 4-3 Equipment Se tup
Procedure
1. Zero and calibrate the power meter and power sensor as described in the power meter operation manual.
Type-N (m), to APC
3.5(m) 1250-1743
Cables
(2) APC 3.5mm (36
in) E4407B and E4408B only 8120-4921 or 11500E
BNC (m) both ends,
(48in) 10503A
Additional Equipment for 75-Ohm Input
Pad, minimum loss 11852B
Type-N (f), to BNC
(m) 1250-1534
Miscellaneous
Power Meter EPM-441A (E4418A)
Power Sen s or, 75 Ω8483A
Power Sen s or, 50 Ω8485A
Power Splitter 11667B
Item Critical Specifications
(for this test) Recommended
Agilent Model