Brother MFC-9550 manual Setup Send

O N - S C R E E N P R O G R A M M I N G 25

2. SETUP RECEIVE
Function		Description	Factory Set		Chapter
1.	RING DELAY	Number of rings before the	RING DELAY:02		5
		machine answers in Fax/Tel	TOLL SAVER:OFF
		(F/T), Fax or TAD (Message	(MFC-9550)
		Manager for MFC-9550) mode.
2.	F/T RING TIME	Sets the time for F/T pseudo-ring	30		5
		in Fax/Tel (F/T) mode.
3.	FAX DETECT	Receive fax messages without	ON		5
		pressing the Start key.
4.	REMOTE CODE	Enter code to activate or	OFF		5
		deactivate your machine from a	(	51, #51)
		remote location.
5.	REDUCTION	Reduces size of image.	AUTO		5
6.	MEM. RECEIVE	Automatically stores any	ON		5
		incoming faxes in its memory
		if it runs out of paper.
7.	PRINT DENSITY	Adjusts printing to be lighter or	--		5
		darker.
8.	POLLING RX	You call another fax machine to	--		5
		receive a fax from it.
9.	TONER SAVE	Increase life of toner cartridge.	OFF		5
0.	PC INTERFACE	ON/OFF	ON		5
	(Only for MFC-9550)
3. SETUP SEND
Function		Description	Factory Set		Chapter
1.	COVERPG SETUP	Automatically sends a	OFF		6
		programmable cover page or
		prints a sample cover page.
2.	COVERPAGE NOTE	Program a customized message	--		6
		for fax cover page.
3.	CONTRAST	Change the lightness or darkness	AUTO		6
		of a fax you are sending.
4.	RESOLUTION	Allows you to change	STANDARD		6
		resolutions page by page.
5.	OVERSEAS MODE	Special setting for international	OFF		6
		transmissions.
6.	CALL RESERVE	You can send a fax, then speak	OFF		6
		to the person operating the
		other fax machine or print a
		sample call back message.
7.	TIMER	Set the machine to send your	--		6
		documents later.
8.	POLLED TX	Set Polled Transmission for	--		6
		someone to poll your fax machine
		to receive a fax from you.
9.	REAL TIME TX	NEXT FAX ONLY/ON/OFF	OFF		6