
4 | 29 |
| |
C H A P T E R F O U R |
|
Initial |
|
Setup |
|
Getting Started
Setting the Dialling Mode (Tone/Pulse)
Your machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below.
1For the
The screen prompts you to select TONE or PULSE.
DIALLING:TONE
DIALLING:PULSE
2Use or
to select the dialling mode.
3Press Set when the screen displays the dialling mode you want.
4Press Stop to exit.
Although this equipment can use either Pulse or Tone signalling, only the performance of the Tone signalling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use the Tone signalling for access to public or private emergency services. The Tone signalling also provides faster call set up.