Brother MFC-9550 manual Cooling Down

142 C H A P T E R S E V E N T E E N

ERROR MESSAGE	CAUSE	ACTION
COOLING DOWN	The temperature of the drum	You must wait and allow the
PLEASE WAIT	unit or toner cartridge is too	machine to resume printing
	hot. The machine will pause its	when it is ready.
	current print job and go into
	cooling down mode. During the
	cooling down mode, you will
	hear the cooling fan running
	while the display on the
	machine shows COOLING
	DOWN and PLEASE WAIT.
COVER OPEN	The top cover or Multi-purpose	Open, then close, each cover.
	sheet feeder cover was not
	completely closed.
DISCONNECTED	The other party or other party’s	Try to transmit or calling the
	fax machine terminated the call.	other party to see what happened
		or receive again.
DOCUMENT JAM	Documents were not inserted or	Do not pull paper out until you
	fed properly or document was	see “Document Jam” in this
	too long.	chapter.
DOWNLOAD FULL	The download buffer is full.	Press FF/Cont. Printing will
		resume (the downloading is
		cancelled).
MACHINE ERROR XX	Your machine has a mechanical	Unplug the machine.
PRESS STOP KEY	problem.	Then contact your Brother
		dealer for servise.
MEMORY FULL	Your machine memory	• Press the FF/Cont to print
	capacity has been exceeded.	the data remaining in the
		machine.
		• If you have installed the
		Windows® driver, try again
		after setting the True Type
		mode to “Print as Graphics”
		in the PRINT menu of your
		application software.
		• Reduce the print resolution
		or reduce the complexity of
		your document.
		• Expand the memory with the
		optional memory board.
		(ME1000 or ME2000)