xviii
CAUTION Possibility of equipment damage
CAUTION
Damage to the backplane connector pins Align the card before seating it, to avoid bending the backplane connector pins. Use light thumb pressure to align the card with the connectors. Next, use the levers on the card to seat the card into the connectors
CAUTION Possibility of static electricity damage
CAUTION
Static electricity damage
Wear a static discharge wrist strap connected to the wrist- strap grounding point of a frame supervisory panel (FSP) or a modular supervisory panel (MSP). This precaution protects the cards against damage caused by static electricity.
DANGER Possibility of personal injury
DANGER
Risk of personal injury
Handle the card by the edges only. Do not touch the components on the card. These components reach very high temperatures, and can burn causing personal injury.
DANGER Possibility of electrocution
DANGER
Risk of electrocution
Do not open the front panel of the inverter unless fuses F1, F2, and F3 have been removed. The inverter contains high voltage lines. Until the fuses are removed, the high voltage lines are active, and you risk being electrocuted.
How commands, parameters, and responses are represented
Commands, parameters, and responses in this document conform to the following conventions.
Input prompt (>)
An input prompt (>) indicates that the information that follows is a command:
>BSY
