Cabletron Systems DMS-100 manual Datafill

Chapter 3: EIU datafill 79

Datafill sequence and implications

The following tables must be datafilled before table IPROUTER:

•PMLOADS

•LIUINV

•IPNETWRK

Before entering data in table IPROUTER, Nortel Networks recommends to place the default EIU in the off-line state.

Datafill

Table 13 lists the fields and value ranges used to datafill an EIU in table

IPROUTER.

While table 13 provides all the information you need to datafill for EIUs, complete information on table IPROUTER is in DMS-100 Translations Guide, 297-xxxx-350.

Table 13 Field descriptions for table IPROUTER for EIU datafill

Field	Subfield or	Entry	Explanation and action
	refinement
RKEY		0 to 63	Router key
			Enter the identification number of the IP
			router. This is the key into the table.
ROUTER		see subfields	Router
			This field consists of subfields
			WORD_EIU and EIU_RNG.
	WORD_EIU	EIU	Ethernet interface unit
			Enter EIU (Ethernet interface unit).
			Entries outside this range are invalid.
	EIU_RNG	0 to 750	Ethernet interface unit range
			Enter the specific EIU to be accessed
			for the router index.
SNIPADR		table of 4 digits	Supernode-side Internet Protocol
		(0 to 255)	address
			Enter the SuperNode-side IP address.
ETHIPADR		table of 4 digits	Ethernet-side Internet Protocol address
		(0 to 255)	Enter the Ethernet-side IP address.
(Sheet 1 of 2)

DMS-100 Family EIU User Guide TELECOM12