
Chapter 3: EIU datafill 91
For more information on throttling, refer to“IP throttling” on page 61 and to the Provisioning Rules for LPP, SSLPP, and SNSE LIS, System Engineering Bulletin number
Datafill sequence and implications
The following tables must be datafilled before table IPTHRON:
•inventory tables for nodes that are datafilled in field SNNODE in table
IPTHRON
Datafill
Table 22 on page 91 lists the fields and value ranges used to datafill an EIU in table IPHOST.
While table 22 provides all the information you need to datafill for EIUs, complete information on table IPHOST is in
Table 22 Field descriptions for table IPTHRON for EIU datafill
Field | Subfield or | Entry | Explanation and action |
| refinement |
|
|
|
|
|
|
LMSNODE |
| see subfields | Local message switch node |
|
|
| This is the first and key field of the table |
|
|
| and consists of subfields LIUNAME and |
|
|
| LIUNO. |
| LIUNAME | APU | Link interface unit name |
|
| or | Enter the link interface unit (LIU) name. |
|
| EIU | This field indicates an IP capable node |
|
|
| connected to the local message switch. |
|
|
| The node datafilled here must first be |
|
|
| datafilled in table LIUINV. |
|
|
| Enter APU for application processor |
|
|
| unit. |
|
|
| Enter EIU for Ethernet interface unit. |
| LIUNO | 0 to 750 | Link interface unit number |
|
|
| Enter the node index. |
TXCAPCT |
| 0 to 32767 | Transmit capacity |
|
|
| Enter the IP transmission rate in kbyte/s |
|
|
| from the node to all other SuperNode IP |
|
|
| nodes. |
RXCAPCT |
| 0 to 32767 | Receive capacity |
|
|
| Enter the IP receive rate in kbyte/s from |
|
|
| all other SuperNode nodes to the node. |
|
|
|
|
(Sheet 1 of 3) |
|
|
|
|
|
|
|