xix

Commands and fixed parameters

Commands and fixed parameters that are entered at a MAP terminal are shown in uppercase letters:

>BSY CTRL ctrl_no

Variables

Variables are shown in lowercase letters:

>BSY CTRL ctrl_no

The letters or numbers that the variable represents must be entered. Each variable is explained in a list that follows the command string.

Responses

Responses correspond to the MAP display and are shown in a different typeface:

FP 3 Busy CTRL 0: Command request has been submitted.

FP 3 Busy CTRL 0: Command passed.

The following excerpt from a procedure shows the command syntax used in this document:

Step Action

1Start the FTP tool by typing

>ftp nnn.nnn.nnn.nnn and pressing the Enter key.

where

 

nnn

is the portion of the IP address that identifies the node

Example:

 

>ftp 47.187.112.215

Example of a MAP response:

Allocated a Session ID Successfully 220 bcaryfc6 FTP server

(Version $Revision: 1.21 $ $Date: 88/12/21 10:19:25 $) r

DMS-100 Family EIU User Guide TELECOM12

Page 19
Image 19
Cabletron Systems DMS-100 manual Commands and fixed parameters, Variables, Responses