Cabletron Systems DMS-100 manual Ftp lcd ‘/S00DTEMP’, If the filename, Ftp lrecl

Appendix C: Using FTP 127

5Determine the next step.

If the file	Do
is not stored the	step 6
current local directory
is stored on the	step 7
current local directory

6Change directory on the local host (DMS-100 switch) by typing ftp> lcd path_name

and pressing the Enter key.

where
path_name	is a valid directory path
Example:

ftp> lcd ‘/S00DTEMP’

Example of a MAP response

FTP: Local directory changed.

7Determine the next step.

If the filename	Do
has an extension that	step 8
CANNOT have the
record length
automatically
detected. Refer to the
section “Automatic
record length
detection in this
appendix”.
has an extension that	step 10
can have the record
length automatically
detected

8Set the record length of the file by typing ftp> lrecl rec_length

and pressing the Enter key.

where
rec_length	is the record length required for the file
Example:

ftp> lrecl 256

This example sets the default record length on the DMS-100 switch to 256.

DMS-100 Family EIU User Guide TELECOM12