Canon 3025, 3030, 3035, 3045 manual 107

When you use the stack bypass to make copies, straighten out curled paper prior to use, as shown below. Curled paper may cause a paper jam.

Feeding Direction

To print on the back side of preprinted paper, load the preprinted paper face up into the stack bypass, as shown in the illustration below.

	Output		Feeding
	Direction		Direction
After the first one-sided		When copying on the back
copy is made		side of a preprinted sheet.

IMPORTANT

•If the paper retaining lever is not set securely, a paper jam may occur, or paper may be fed from a paper drawer instead of the stack bypass.

•When loading paper into the stack bypass, align the paper stack neatly between the slide guides. If the paper is not loaded correctly, a paper jam may occur.

•If you are printing on heavyweight paper or envelopes using the stack bypass, and find that the paper or envelopes are not being fed smoothly or evenly through the stack bypass, remove the paper or envelopes, curl the feeding edges upward approximately 1/8" (3 mm), and then reload the paper or envelopes. Curling the feeding edges enables the rollers to grip the paper or envelopes as they are fed into the stack bypass.

2

Basic Operations

Making Prints Using the Stack Bypass 2-43