Canon 3025, 3030, 3035, 3045 1 Open the front cover of the finisher, 3 Close the front cover of the finisher, 2 Align the pointed notch on the knob with the shaded region ()

1 Open the front cover of the finisher.

If the optional Puncher Unit-R1 is not attached, this procedure is not necessary. Proceed to step 4.

2 Align the pointed notch on the knob with the shaded region ().

Troubleshooting

8

3 Close the front cover of the finisher.

CAUTION

When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal injury.

Clearing Paper Jams 8-39