4

Customizing Settings

Standard Paper for the Stack Bypass

You can set the paper size and type that the stack bypass uses beforehand. This setting is useful if you always load the same paper size and type into the stack bypass.

If the Stack Bypass Standard Settings are stored when using the optional Fax function, you can also use the stack bypass to receive faxes.

IMPORTANT

When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam.

NOTE

If you are using the stack bypass as a paper source for the Copy, Mail Box, and Fax (Receive) functions, you must select the stack bypass when specifying the Drawer Eligibility for APS/ADS setting. (See "Auto Paper Selection/Auto Drawer Switching," on p. 4-31.)

1 Press (Additional Functions) ➞ [Common Settings] ➞

[Stack Bypass Standard Settings].2 Press [On] ➞ [Store].

If you press [Off], proceed to step 5.

3 Select the desired paper size.

●If you want to select a standard paper size:

❑ Select the desired paper size ➞press [Next].

NOTE

To select an A or B series paper size, press [A/B-size].

●If you want to select an irregular paper size:

❑Press [Free Size].

❑Press [Next].

4-46Specifying Common Settings