Load LTR size paper.

Cause

The optimum paper size selected by the Automatic Paper Selection mode is not

 

available in the machine.

Remedy 1 Load the indicated paper size into the machine. If you press (Start) while this message is displayed, prints are made with the currently selected paper size.

Remedy 2 If the message continues to be displayed even if the indicated paper size is loaded, set Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions screen) for that paper drawer to 'On'. (See "Auto Paper Selection/Auto Drawer Switching," on p. 4-31.)

Return page 1 to the top, and then press the Start key.

Cause

Scanning was stopped due to a problem with the optional feeder.

 

 

Remedy

Arrange the originals in page order with the first page on top. Place the originals

 

back into the feeder's original supply tray, and press (Start).

Return page 1 to the top, and then press the Start key. (Data for the scanned original has exceeded limits on the size that can be handled by this machine. Automatically adjust settings and try again.)

Cause

Scanning has stopped because the data size of the scanned original exceeds

 

the maximum data size that the machine can handle.

 

 

Remedy

Try scanning the original again from the first page. If scanning is still not

 

possible, reduce the Sharpness mode setting, and select [Text] for the original

 

type.

Scanning has stopped because the size of the data for the scanned original exceeds the limit. Scanning may be possible if [Sharpness] is reduced and the type of original is set to [Text].

Cause

Scanning has stopped because the data size of the scanned original exceeds

 

the maximum data size that the machine can handle.

 

 

Remedy

Reduce the Sharpness mode setting, and select [Text] for the original type.

Remove the paper from the output tray.

Cause

Prints from the previous job remain in the output tray.

 

 

Remedy

Remove the prints remaining in the output tray. Printing automatically resumes.

Troubleshooting

8

List of Error Messages

8-87