8 Close the front cover of the finisher.

CAUTION

When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal injury.

IMPORTANT

When you have replaced the staple cartridge, be sure to manually reposition the staples in the saddle stitcher unit. (See "Saddle Stitch Staple Repositioning," on p. 4-60.)

Removing Punch Waste

When the punch waste tray of the optional Puncher Unit-M1 becomes full, a screen similar to the one shown below appears on the touch panel display. Follow the procedure described below to remove the punch waste.

NOTE

This procedure is necessary only if the optional Puncher Unit-M1 is attached.

7

Routine Maintenance

Finisher-AE1/Saddle Finisher-AE2/Puncher Unit-M1 (Optional)

7-43