NOTE

•For instructions on entering characters, see "Entering Characters from the Touch Panel Display," on p. 2-22.

•If any of the following is true for the destination machine, a message <Could not retrieve information for the device to register. Register as a destination?> is displayed. If you press [Yes], <Deliverable Settings> on the Details screen will be blank.

-The main power is turned OFF

-The destination machine is not connected to the network

-A default key is not set

-Every function in Receive Restriction for Each Function under <Receiving Settings> in Device Information Delivery Settings is set to 'On'

●To automatically search for destinations:

❑ Press [Auto Search/Register].

❑ Press [Auto Search Start].

Press [-] or [+] to set the search depth (how many routers to search).

NOTE

•Since searching uses SLP (Service Location Protocol), machines behind a router will not be detected if the router is set to restrict passing with the SLP protocol.

•If any of the following is true for the destination machine, you cannot search the destination.

-The main power is turned OFF

-The destination machine is not connected to the network

-Every function in Receive Restriction for Each Function under <Receiving Settings> in Device Information Delivery Settings is set to 'On'

❑Select the destination ➞press [OK].

To select all of the destinations, press [Select All]. However, if a destination is selected, this key changes to [Clear Selection].

6

System Manager Settings

Specifying Device Information Delivery Settings

6-43