1

Before You Start Using This Machine

4 When the following screen appears, wait for the machine to complete the shutdown process.

If you need to immediately operate the machine after starting the shutdown process, press [Restart] ➞[Yes].

If you press [Restart] when device information is being updated, a message asking for your confirmation to continue appears on the screen. Press [Yes].

CAUTION

You can also force the shutdown of the machine (omitting the normal job cancellation process) by pressing [Forced Off]. If you press [Forced Off] while data is being processed, a message asking for your confirmation to continue appears on the screen. Press [Yes]. However, as it is possible that this will destroy data which is being processed, it is not recommended. Note that Canon will not be liable for any damages resulting from the loss of data on the hard disk drive. For more information, contact your local authorized Canon dealer.

NOTE

•It may take some time for the machine to completely shut down depending on the network you are using.

•The screen below is displayed when you press [Forced Off] in the following case. - When device information is being updated

1-24Main Power and Control Panel Power