3

Optional Equipment

Finisher-S1/Puncher Unit-R1

The Finisher-S1 is equipped with the following finishing modes: Collate, Group, Offset, and Staple. (See "Finishing Modes," on p. 3-26.)

The Puncher Unit-R1 is equipped with the Hole Punch mode.

If the optional Copy Tray-J1 is attached to the right side of the machine, and the optional Additional Finisher Tray-B1 is attached to the Finisher-S1, prints can be delivered to three different locations.

IMPORTANT

The Finisher-S1 cannot be attached with the optional Inner 2 Way Tray-D1.

3-24Finisher-S1/Puncher Unit-R1