Adjusting a Paper Drawer to Hold a Different Paper Size

If you want to load a different paper size into a paper drawer, follow the procedure described below to adjust the paper drawer guides.

IMPORTANT

Only LTR transparencies can be used. Make sure that the paper size dial is set to 'LTR' when loading transparencies in a paper drawer. If transparencies of a different size (other than LTR) are loaded in a paper drawer, the paper size and remaining amount of paper will not be detected correctly.

1 Press and release the button on the paper drawer that you want to adjust. Grip the handle, and pull out the paper drawer until it stops. Remove all of the remaining paper.

2 Lift out the left guide, and insert it into the holes marked for the desired paper size.

Left Guide

7

Routine Maintenance

Paper Drawers

7-7