7

Routine Maintenance

Replacing the Staple Cartridge in the Saddle Stitcher Unit

When the saddle stitcher unit of the optional Saddle Finisher-AE2 is almost out of staples, and the staple cartridge must be replaced, a screen similar to the one shown below appears on the touch panel display. Follow the procedure described below to replace the staple cartridge.

Use only staple cartridges intended for use with this machine.

IMPORTANT

If necessary, remove all of the output paper in the Booklet Tray before replacing the staple cartridge in the saddle stitcher unit.

NOTE

•This procedure is necessary only if the optional Saddle Finisher-AE2 is attached.

•We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.

1 Open the front cover of the finisher.

7-40Finisher-AE1/Saddle Finisher-AE2/Puncher Unit-M1 (Optional)