●If login authentication by a login service (SDL or SSO) is set:

❑ The Start Up screen is displayed until the machine is ready to scan.

❑After the Start Up screen disappears, the MEAP Start Up screen is displayed regardless of the Set as Initial Function settings.

IMPORTANT

•If you turn OFF the main power, wait at least 10 seconds before turning the main power back ON. For instructions on restarting (turning the main power switch OFF and then ON) the machine, see "Main Power and Control Panel Power," on p. 1-15.

•Do not turn the main power OFF, if you want to send or receive I-fax documents. Also, do not turn the main power OFF, if the optional Universal Send Kit is activated, or the Super G3 FAX Board or Super G3 Multi-Line FAX Board is installed, and you want to be able to send or receive fax documents. Sending or receiving I-fax or fax documents cannot be done when the main power is turned OFF.

•If SSO or SDL is set as the login service, the machine will take longer to become ready to scan.

1

Before You Start Using This Machine

Main Power and Control Panel Power

1-19