6

System Manager Settings

IMPORTANT

•Optional imageWARE Accounting Manager software is necessary to use the Domain Authentication system of SSO (including when performing domain authentication with the 'Domain Authentication + Local Device Authentication' system) and Department ID Management simultaneously. If imageWARE Accounting Manager is not installed, and SSO is set as the login service, make sure that Department ID Management is set to 'Off'. Otherwise, you will not be able to log on.

•If you are using SSO and set Department ID Management to 'On', you may not be able to log on. In this case, change the login service to Default Authentication, and then set Department ID Management to 'Off'. For instructions on setting a login service, see Chapter 4, "MEAP System Management," in the MEAP SMS Administrator Guide.

•If the optional Card Reader-C1 is attached, and SDL or Default Authentication is set as the login service, Department ID Management is automatically activated. (See "Card Reader-C1,"on p. 3-44.)

•If SDL or SSO is set as the login service, Department ID Management is performed on the Department ID that shares the same user name and password as the one registered for MEAP User Authentication.

•The user information registered for SDL or the Local Device Authentication system of SSO, and the registered Department ID and password set for Department ID Management must match. If the registered Department ID and password have been changed because information was updated or changed by the Device Information Delivery Settings mode, make sure that you change/update the user information registered for SDL or the Local Device Authentication system of SSO accordingly. For instructions on registering SDL or SSO user information, see the MEAP SMS Administrator Guide.

•If SDL or SSO is set as the login service, the Limit Functions mode will not be available.

NOTE

•The maximum number of digits that you can store for the Department ID and password is seven. If you enter fewer than seven digits for either setting, the machine stores them with leading zeros.

- Example: If <321> is entered, <0000321> is stored.

•Other than using Department ID Management, this machine enables you to manage user information using SDL or SSO.

6-6Department ID Management