2

Basic Operations

Orientation

You can place an original either vertically or horizontally. Always align the top edge of your original with the back edge of the platen glass (by the arrow in the top left corner) or the back edge of the feeder.

Platen Glass

Place the original

Place the original

face down.

face down.

Vertical Placement

Horizontal Placement

Feeder

Place the original

Place the original

face up.

face up.

 

Vertical Placement

Horizontal Placement

NOTE

•If the top edge of the original is not aligned with the back edge of the platen glass (by the arrow in the top left corner), your original may not be scanned correctly, depending on the copy mode that you have set.

•LTR and STMT originals can be placed either vertically or horizontally. However, the scanning speed for horizontally placed originals is somewhat slower than vertically placed originals. Place originals horizontally when scanning with a Preset Zoom, such as when enlarging an LTR original onto 11" x 17" paper.

•Horizontally placed LTR and STMT originals are referred to as LTRR and STMTR.

•12" x 18", 11" x 17", and LGL originals must be placed horizontally.

2-32Placing Originals