2 Select the functions for which to designate output Trays A, B, and C ➞press [OK].

The optional Saddle Finisher-AE2 is attached.

[Printer] appears only if the optional UFR II/PCL Printer Kit or PS Printer Kit is activated.

[Other] is used for designating a tray for printing reports.

[Receive/Fax] appears if the Universal Send Kit is activated, and the optional Super G3 FAX Board or Super G3 Multi-Line FAX Board is installed. If only the Universal Send Kit is activated, [Receive] appears. If only the optional Super G3 FAX Board or Super G3 Multi-Line FAX Board is installed, [Fax] appears.

If the optional Super G3 Multi-Line FAX Board is installed, you can set two different trays for receiving faxes.

If you want to use an output tray for only one function, select only that function.

IMPORTANT

•If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated for the same function. However, it is recommended that you only designate one tray for fax/I-fax documents to prevent them from getting lost.

•If the optional Finisher-S1 and Copy Tray-J1 are attached and the Staple mode is set, the sheets are output to Tray A, regardless of the Tray Designation settings.

•If the optional Finisher-S1 and Copy Tray-J1 are attached and the following paper is selected, the sheets are output to trays other than the Copy Tray-J1, regardless of the Tray Designation settings: nonstandard, envelopes, heavy paper, transparencies, labels, or tracing paper.

•If the optional Inner 2 Way Tray-D1 and Copy Tray-J1 are attached and the following paper is selected, the sheets are output to trays other than the Copy Tray-J1, even if the Copy Tray-J1 is specified as the destination: nonstandard, envelopes, heavy paper, transparencies, labels, or tracing paper.

4

Customizing Settings

Specifying Common Settings

4-39