NOTE

If there are no staples ready for stapling after the cover is closed, the stapler unit automatically performs a "dry" stapling operation to reposition the staples.

Saddle Stitcher Unit (Optional)

If a staple jam occurs inside the saddle stitcher unit of the optional Saddle Finisher-AE2, a screen similar to the one shown below appears on the touch panel display. Check the location of the staple jam, and follow the procedure described below, and the procedure that appears on the touch panel display, to remove any jammed staples.

IMPORTANT

•If necessary, make sure to remove all of the paper in the Booklet tray before clearing a staple jam inside the saddle stitcher unit.

•This procedure is necessary only if the optional Saddle Finisher-AE2 is attached.

1 Open the front cover of the finisher.

Troubleshooting

8

Clearing Staple Jams

8-81