Inch Entry

Specifying this setting ensures that the key for entering values in inches is displayed on the various numeric entry screens.

NOTE

Even if Inch Entry is set to 'On', you still have the option to enter measurements in millimeters by pressing [mm] on the various numeric entry screens.

1 Press (Additional Functions) ➞[Common Settings] ➞[InchEntry].

2 Select [On] or [Off] ➞ press [OK].

Auto Paper Selection/Auto Drawer Switching

You can set which paper sources can be used for Automatic Paper Selection and Auto Drawer Switching. This setting can be made independently for all functions of the machine, and is especially useful when you want to use different paper sources for different purposes.

NOTE

Paper sources set to 'On' are used for the following functions:

-APS (Auto Paper Selection): The machine automatically selects the appropriate paper size (paper source) based on the original's size and copy ratio settings (when making a copy), or the set ratio of the image (when receiving a fax).

-ADS (Auto Drawer Switching): If a paper source runs out of paper during a continuous print job, the machine automatically selects another paper source with the same paper size, and begins feeding paper from that paper source.

1 Press (Additional Functions) ➞ [Common Settings] ➞

[Drawer Eligibility For APS/ADS].

4

Customizing Settings

Specifying Common Settings

4-31