4

Customizing Settings

Adjusting the Machine

This section describes how you can make fine adjustments to the settings of the machine, such as making a fine adjustment to the printed image and the page number or watermark position.

It is recommended that you perform an Automatic Gradation Adjustment and clean the machine regularly.

Zoom Fine Adjustment

When you print a copy or a document from an inbox, a slight difference in size may occur between the size of the original image, and the size of the copied/printed image. In this case, you can perform a fine adjustment to compensate for this difference.

1 Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞[Zoom Fine Adjustment].2 Press [-] or [+] to adjust the percentage (%) ➞press [OK].

If you are making an adjustment to either the X (horizontal) or Y (vertical) direction, press [-] or [+] to enter a value for that direction only.

Saddle Stitch Staple Repositioning

You can reposition the stapler of the saddle stitcher unit after clearing a staple jam, or after replacing the staple cartridge. Saddle stitch staple repositioning works by feeding several sheets of paper into the saddle stitcher unit and stapling them together.

IMPORTANT

•Only use 12" x 18", 11" x 17", LGL, or LTRR paper for the saddle stitch staple repositioning procedure.

•Make sure to remove all output booklets from the optional Booklet Tray before performing the saddle stitch staple repositioning procedure.

4-60Adjusting the Machine