NOTE

•Regardless of the stack bypass setting, you cannot select 'Off' for all of the paper sources at the same time. At least one of the paper sources, besides the stack bypass must be set to 'On'.

•The settings under [Copy] include an option called [Consider Paper Type], which determines whether the machine considers the paper type loaded in a paper source.

-If [Consider Paper Type] is set to 'On', paper is not fed from another paper source when the original paper source runs out of paper, unless another paper source is loaded with the same paper size and type. For more information on stored paper types, see "Identifying the Type of Paper in a Paper Source," on p. 4-34.

-If [Consider Paper Type] is set to 'Off', paper is fed from another paper source when paper in the current paper source runs out, as long as the same paper size/ type is loaded in that paper source.

•If you selected [Printer] in step 2, the Stack Bypass icon () will not be displayed on the paper selection screen.

Designating the Envelope Type

You can use Paper Drawer 1 as an envelope cassette, if you attach the optional Envelope Feeder Attachment-C2, set the size switch to the appropriate envelope type, and the paper size dial to 'ENV.'.

IMPORTANT

This procedure is necessary only if the optional Envelope Feeder Attachment-C2 is attached to Paper Drawer 1.

1 Press (Additional Functions) ➞ [Common Settings] ➞

[Envelope Cassette].2 Select [ENV.1] or [ENV.2] ➞select the envelope type ➞ press [OK].

Make sure that the selected envelope type is the same envelope type that is loaded in Paper Drawer 1.

Specifying Common Settings

4-33

4

Customizing Settings