Canon 3025, 3030, 3035, 3045 manual 478

Troubleshooting

8

Remove the paper from the booklet tray.

Cause	Prints from the previous job remain in the Booklet tray of the optional Saddle
	Finisher-AE2.
Remedy	Remove the prints remaining in the Booklet tray. Printing automatically
	resumes.
Replace toner cartridge.
Cause	Printing is not possible because the toner has run out.
Remedy	Replace the toner cartridge. (See "Replacing the Toner Cartridge," on p. 7-46.)
Place the original on the platen glass.
Cause	The specified mode requires that the original be placed on the platen glass, but
	there is no original on the platen glass.
Remedy	Place the original on the platen glass.
Remove the original from the platen glass.
Cause	An original remains on the platen glass.
Remedy	Remove the original from the platen glass, and place the new original.
Remove the original from the feeder.
Cause	The machine cannot scan your original using the feeder. An original is placed in
	the feeder and on the platen glass.
Remedy	Remove the original from the feeder.
Original scanning area (thin glass strip) is dirty.
Cause	The feeder's scanning area is dirty.
Remedy	Clean the feeder's scanning area. (See "Manual Feeder Cleaning," on p. 7-53.)

8-88List of Error Messages