3

m q

l p

o

n

Optional Equipment

aPlaten Cover Type H

The Platen Cover Type H secures the originals placed on the platen glass.

bFeeder (DADF-N1)

Originals placed in the feeder are automatically fed sheet by sheet onto the platen glass for scanning. The feeder also automatically turns over two-sided originals to make one or two-sided copies.

The Feeder (DADF-N1) is standard-equipped for the imageRUNNER 3045/3035.

cCard Reader-C1

The Card Reader-C1 enables Department ID Management to be performed automatically.

dCopy Tray-J1

The Copy Tray-J1 provides an additional paper output tray.

ePaper Deck-Q1

The Paper Deck-Q1 provides an additional source of paper for printing jobs.

The Paper Deck-Q1 holds up to 2,700 sheets of paper (20 lb bond (80 g/m2)).

fCassette Feeding Unit-Y3

The Cassette Feeding Unit-Y3 provides two additional sources of paper for printing jobs. Each paper drawer holds up to 550 sheets of paper (20 lb bond (80 g/m2)).

gInner 2 Way Tray-D1

The Inner 2 Way Tray-D1 is equipped with the following features: Collate, Group, and Rotate.

hEnvelope Feeder Attachment-C2

The Envelope Feeder Attachment-C2 can only be attached to Paper Drawer 1, and holds only envelopes.

iPuncher Unit-R1

The Puncher Unit-R1 can be attached to the optional Finisher-S1, and is equipped with the Hole Punch mode.

jFinisher-S1

The Finisher-S1 is equipped with the following modes: Collate, Group, Offset, and Staple (Corner).

kAdditional Finisher Tray-B1

The Additional Finisher Tray-B1 can be attached to the optional Finisher-S1 to provide an additional paper output tray.

lFinisher-AE1

The Finisher-AE1 is equipped with the following modes: Collate, Group, Offset, and Staple (Corner and Double).

mBuffer Pass Unit-E2

The Buffer Pass Unit-E2 is required to attach the Finisher-AE1 or Saddle Finisher-AE2 to the main unit.

nPuncher Unit-M1

The Puncher Unit-M1 can be attached to the optional Finisher-AE1 or Saddle Finisher-AE2, and is equipped with the Hole Punch mode.

oStaple Cartridge-D2/D3

The Staple Cartridge-D2/D3 can be attached to the optional Saddle Finisher-AE2 for saddle stitching.

pStaple-J1

The Staple-J1 can be attached to the optional finisher for stapling (Corner and Double).

3-4System Configuration