3

Optional Equipment

Finishing Modes

The Finisher-S1 is equipped with the following finishing modes.

NOTE

If the Collate or Group mode is set, the output tray moves downward as the stack of paper that is output increases in quantity and thickness. Once the output tray has reached its stacking limit, printing stops temporarily. Remove all of the prints from the output tray, and printing resumes.

■Collate Mode

The prints are automatically collated into sets arranged in page order. The collated print sets can be shifted by pressing [Offset].

■Group Mode

All prints of the same original page are grouped together. The grouped print sets can be shifted by pressing [Offset].

■Offset Mode

The print output is shifted alternately to the front and back of the tray, in a vertical (portrait) orientation, or a horizontal (landscape) orientation, depending on the orientation of your originals.

NOTE

If you press [Offset] when either the Collate or Group mode is set, each set of prints is shifted approximately 1 1/4" (30 mm) before it is delivered to the output tray.

3-26Finisher-S1/Puncher Unit-R1