3

Optional Equipment

Procedure after Using the Machine

1 After you finish using the machine, remove the control card.

The touch panel display returns to the screen for inserting the control card.

IMPORTANT

Once you have removed the control card, you cannot operate the machine until the control card is inserted again.

Department ID Management

This section describes how to change the password and page limit, and how to check the print totals when the control card is being used.

NOTE

The maximum number of digits that you can register for the password is seven. If you enter fewer than seven digits, the machine registers the password with leading zeros.

- Example: If <321> is entered, <0000321> is registered.

Flow of Additional Functions Operations

This section describes the flow of Additional Functions operations when the optional Card Reader-C1 is attached.

NOTE

Settings specified from the Additional Functions screen are never changed when you press (Reset).

3-46Card Reader-C1