6

System Manager Settings

USB Settings

This mode enables you to specify the USB settings.

NOTE

Changes are only effective after you restart the machine (the main power switch is turned OFF, and then back ON). For instruction on restarting (turning the main power switch OFF and then ON) the machine, see "Main Power and Control Panel Power," on p. 1-15.

Using a USB Device

Set Use USB Device to 'On' to connect a computer to the machine via the USB port.

1 Press (Additional Functions) ➞[System Settings] ➞ [USB Settings] ➞[Use USB Device].

2 Select [On] or [Off] ➞ press [OK].

Using a USB Host

Set Use USB Host to 'On' to connect a host device with the machine via the USB port.

NOTE

[Use USB Host] is displayed only if the optional USB Application Interface Board is attached.

1 Press (Additional Functions) ➞[System Settings] ➞ [USB Settings] ➞[Use USB Host].

2 Select [On] or [Off] ➞ press [OK].

6-38USB Settings