3

Optional Equipment

aTop Cover of the Finisher

Open this cover to remove jammed paper. (See "Inside the Top Cover of the Finisher-AE1/ Saddle Finisher-AE2 (Optional)," on p. 8-53.)

bTop Cover of the Puncher Unit-M1

Open this cover to remove jammed paper. (See "Puncher Unit-M1 (Optional)," on p. 8-65.)

cFront Cover of the Punch Waste Tray

Open this cover to remove punch waste or to remove jammed paper. (For instructions on removing punch waste, see "Removing Punch Waste," on p. 7-43.For instructions on clearing a paper jam, see "Puncher Unit-M1 (Optional)," on p. 8-65.)

dBuffer Pass Unit-E2

Open the Buffer Pass Unit-E2 to remove jammed paper. (See "Inside the Buffer Pass Unit-E2 of the Finisher-AE1/SaddleFinisher-AE2 (Optional)," on p. 8-56.)

eFront Cover of the Finisher-AE1

Open this cover to replace the staple cartridge in the stapler unit, or to clear a staple jam. (For instructions on replacing the staple cartridge, see "Replacing the Staple Cartridge in the Stapler Unit," on p. 7-36.For instructions on clearing a staple jam, see "Finisher-AE1/SaddleFinisher-AE2 (Optional)," on p. 8-78.)

fFront Cover of the Saddle Finisher-AE2

Open this cover to replace the staple cartridge, remove jammed paper, or to clear a staple jam in the stapler unit and saddle stitcher unit. (For instructions on replacing the staple cartridge in the stapler unit, see "Replacing the Staple Cartridge in the Stapler Unit," on p. 7-36.For instructions on replacing the staple cartridge in the saddle stitcher unit, see "Replacing the Staple Cartridge in the Saddle Stitcher Unit," on p. 7-40.For instructions on clearing a paper jam, see "Inside the Front Cover of the Saddle Finisher-AE2 (Optional)," on p. 8-58,and "Saddle Stitcher Unit (Optional)," on p. 8-61.For instructions on clearing a staple jam in the stapler unit, see "Finisher-AE1/SaddleFinisher-AE2 (Optional)," on p. 8-78.For instructions on clearing a staple jam in the saddle stitcher unit, see "Saddle Stitcher Unit (Optional)," on p. 8-81.)

gBooklet Tray (Saddle Finisher-AE2 Only)

Prints that are saddle stitched are output to this tray.

hBooklet Tray Guide (Saddle Finisher-AE2 Only)

Set this guide to match the size of the output paper. (See "Finishing Modes," on p. 3-33.)

iLower Output Tray

Prints are output to this tray. You can set the Tray Designation mode to designate this tray for outputting prints when using certain functions. (See "Output Tray Designation," on p. 4-37.)

jUpper Output Tray

Prints are output to this tray. You can set the Tray Designation mode to designate this tray for outputting prints when using certain functions. (See "Output Tray Designation," on p. 4-37.)

3-32Finisher-AE1/Saddle Finisher-AE2/Puncher Unit-M1