CAUTION

When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal injury.

NOTE

If there are no staples ready for stapling after the cover is closed, the stapler unit automatically performs a "dry" stapling operation to reposition the staples.

Removing Punch Waste

When the punch waste tray of the optional Puncher Unit-R1 becomes full, a screen similar to the one shown below appears on the touch panel display. Follow the procedure described below to remove the punch waste.

NOTE

This procedure is necessary only if the optional Puncher Unit-R1 is attached.

1 Open the front cover of the finisher.

7

Routine Maintenance

Finisher-S1/Puncher Unit-R1 (Optional)

7-33