6

System Manager Settings

NOTE

•Before setting <Add. Functions Settings Value>, <Dept. ID>, or <Address Book> to 'Off', it is necessary to set a default key in Network Settings (from the Additional Functions screen). (See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)

•Changes are only effective after you restart the machine (the main power switch is turned OFF, and then back ON). For instructions on restarting (turning the main power switch OFF and then ON) the machine, see "Main Power and Control Panel Power," on p. 1-15.

Checking/Printing the Communication Log

You can check and print the following information on the Communication log: Start time, destination address, delivery result, end time, data content, and end code.

Checking the Communication Log

1 Press (Additional Functions) ➞[System Settings] ➞

[Device Information Delivery Settings] ➞ [Communication

Log].

2 Check the communication logs ➞press [Done].

NOTE

To view the detailed information of a communication log, select the log ➞press [Details].

Printing the Communication Log

NOTE

For details on the Device Information Communication Log, see "Device Information Communication Log Report," on p. 9-6.

1 Press (Additional Functions) ➞[System Settings] ➞

[Device Information Delivery Settings] ➞ [Communication

Log].

6-54Specifying Device Information Delivery Settings