Finishing Modes

The Finisher-AE1 and Saddle Finisher-AE2 are equipped with the following finishing modes.

CAUTION

•Do not place anything other than output paper in the trays of the finisher, as doing so may damage the trays.

•Do not place anything under the trays of the finisher, as doing so may damage the trays.

3

Optional Equipment

NOTE

If the Collate or Group mode is set, the output trays move downward as the stack of paper that is output increases in quantity and thickness. Once an output tray has reached its stacking limit, subsequent prints are automatically delivered to the next available tray. If all of the available trays have reached their stacking limits, printing stops temporarily. Remove all of the output paper from the trays. The trays move upward, and printing resumes.

■Collate Mode

The prints are automatically collated into sets arranged in page order. The collated print sets can be shifted by pressing [Offset].

■Group Mode

All prints of the same original page are grouped together. The grouped print sets can be shifted by pressing [Offset].

■Offset Mode

The print output is shifted alternately to the front and back of the tray, in a vertical (portrait) orientation, or a horizontal (landscape) orientation, depending on the orientation of your originals. For example, if you place LTRR originals, the paper is output and shifted in the horizontal direction. If you place LTR originals, the paper is output and shifted in the vertical direction.

Finisher-AE1/Saddle Finisher-AE2/Puncher Unit-M1

3-33